|Brand||All reputated brand available|
|Body Material||Stainless Steel|
|I Deal In||New Only|
The unit is a versatile, wherever excess humidity must be removed from the air. The dehumidifier is with hermetically sealed compressor of ‘Hitachi’ refrigeration type, to operate on 230 volts, single phase, complete. The unit is fully mobile, works independently without attendant. The dehumidifier shall be fabricated of stainless steel grade 304. The upper section of dehumidifier shall have main electrical terminal block, electric capacitors, humidistat, relay, water condenser coil, heat exchanger coil, air filter, fan assembly, fan motor, hermatically sealed compressor. Dehumidifier working principal: The Dehumidifier equipment shall work by condensing water vapour from air into liquid. It shall be designed to be placed inside the room where positive control of humidity is required. A fan shall draw air into the unit through water condensing section of the dehumidifier, which constantly condenses moisture at the dew point of air, the condensate eventually builds up in the drain tray at the bottom of the unit. The air shall then pass over the heat exchanger section of dehumidifier regaining heat; the outlet air warm and dry is then circulated into the room. RH Conditions:- The dehumidifier shall have a humidistat assembly for accurate humidity control. RH shall be settable minimum upto 10% RH to 90% RH. The room temperature varies between 5°C to 45°C.